YUKEN Dshg-06 single Solenoid Directional Valve

B1:9 mm; Mass angle ring:0.24 kg; d1 ≈:84.35 mm; r3,4 min.:2.1 mm; d:60 mm; B2:16 mm;

Hexagonal key size for grub screw N:3.969 mm; Basic static load rating C0:11.2 kN; L:83 mm; DN:6.5 mm; Bearing:YET 206-103; T:46.7 mm; Basic dynamic load rating C:19.5 kN; GN:1/4-28 SAE-LT; A3:3.2 mm; Recommended tightening torque for grub screw:6.5 N·m;

d:60.000 mm; Basic Dynamic Radial Load Rating C:49400 N; Oil Speed Rating n2:5900 rpm; B:36.00 mm; Grease Speed Rating n1:4600 rpm; Fillet Radius ra:1.00 mm; Fillet Radius rb:0.60 mm; D:95.0000 mm; Basic Static Radial Load Rating Co:54000 N;

Sealed Speed Rating n3:3200 rpm; Accessories:No Shield, no Seal,; Basic Dynamic Radial Load Rating C:138000 N; d:65.000 mm; B:58.70 mm; Oil Speed Rating n2:4300 rpm; Fillet Radius ra:2.00 mm; D:140.0000 mm; Grease Speed Rating n1:3200 rpm; Basic Static Radial Load Rating Co:108000 N;

r1 min.:1.1 mm; Da min.:271 mm; Basic static load rating C0:11600 kN; D:320 mm; Da max.:309.5 mm; C:100 mm; ra max.:1 mm; α:8 °; Design (sliding contact surface combination):Steel/steel, heavy-d; Material constant KM:330;

D:72.0000 mm; B:33.30 mm; Accessories:One Shield; d:30.000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:6300 rpm; Oil Speed Rating n2:8500 rpm; Sealed Speed Rating n3:6300 rpm; Basic Static Radial Load Rating Co:29000 N; Basic Dynamic Radial Load Rating C:41600 N;

B:30.302 mm; Limiting speed:7000 r/min; Db min.:87 mm; Basic dynamic load rating C:134 kN; db min.:63.5 mm; Fatigue load limit Pu:17 kN; r3,4 min.:3.3 mm; Calculation factor Y0:1; Dimension series:3700; rb max.:3.3 mm;

Calculation factor Y1:2; K:6 mm; D1 ≈:295 mm; Calculation factor e:0.33; B:118 mm; B1:138 mm; r1,2 min.:3 mm; D:340 mm; G:Tr 230x4; d1:200 mm;

Mass bearing:560 kg; ra max.:6 mm; da min.:532 mm; Da max.:798 mm; B:264 mm; Da min.:706 mm; Ca min.:-11.7 mm; s1 max.:75.3 mm; d:500 mm; Fatigue load limit Pu:850 kN;

Recommended maximum temperature max.:50 °C; Basic dynamic load rating C:52.7 kN; Recommended tightening torque for self-locking shaft nut:475 N·m; Shaft design:Shaft with inch fema; Housing material:Machined steel; l1:40 mm; d:39 mm; Corrosion protection:Zinc-coated housing; B1:67 mm; D:1

Calculation factor Y2:2.1; T:254 mm; Calculation factor e:0.48; r3,4 min.:3.3 mm; Basic dynamic load rating C:3600 kN; d1 ≈:365 mm; Comparative radial load rating CF:765 kN; Thrust factor K:1.23; r1,2 min.:1 mm; Basic static load rating C0:7100 kN;